LMD-2140MD
Home Up Search Our Site Return Policy Order Form Physician Corner

 

 

 

LMD-2140MD

Back to monitor page

 

 

 

 

Specification Detail
  • LCD Panel Type
a-Si TFT Active Matrix LCD with an AR-coated protection panel
  • Contrast Ratio
400:1
  • Brightness
450 cd/m2
  • Response Time
30ms
  • Resolution
1024 x 768 dots
  • Picture Size
H x W: Approx. 430 x 322 mm (17 x 12 3/4 inches)
Diagonal: Approx 537 mm (21 1/4 inches)
  • Aspect Ratio
     
4:3
  • Colors
16,770,000
  • Viewing Angle
85°/85°/85°/85°(typical)
  • Input: Composite BNC (x 1)
BNC (x 1)
1.0 Vp-p ±3 dB, sync negative
  • Input: Y/C
4pin Mini DIN (x 1)
Y: 1.0 Vp-p ±3dB, sync negative
C: 0.286 Vp-p ±3dB (NTSC) / 0.3 Vp-p ±3dB (PAL)
  • Input: Component/RGB
BNC (x 3)
  • Component
Y: 1.0 Vp-p ±3 dB
Pb, Pr: 0.7 Vp-p ±3 dB
  • RGB
G: 0.7 Vp-p ±3 dB, Sync on G 0.3 Vp-p
B: 0.7 Vp-p ±3 dB
R: 0.7 Vp-p ±3 dB
  • Ext. Sync
BNC (x1)
0.3 ~ 4 Vp-p ±bipolarity ternary or negative
polarity binary
  • Input: Computer DVI-D
TMDS (Single Link)
  • Input: Computer Analog RGB
HD D-sub15pin (female)
0.7 Vp-p, 75 ohm sync positive (R, G, B)
  • Remote
Parallel Modular 8 pin (Assignable)
  • Remote
Serial RS-232C (serial remote), D-sub 9-pin
  • Output: Composite
BNC (x 1), Loop-through, automatic 75 ohm termination
  • Output: Y/C
4pin Mini DIN (x 1), Loop-through, automatic 75 ohm termination
  • Output: Component/RGB
BNC (x 3), Loop-through, automatic 75 ohm termination
  • Output: Ext. Sync
BNC (x 1), Loop-through, automatic 75 ohm termination
  • Power Consumption
Maximum: Approx. 100 W (with 2 x BKM-255DV)
Standard: Approx. 92 W (without optional input adaptor)
  • Power Requirement
AC 100 to 240 V ±10%, 50/60 Hz
  • Operating Temperature
0 to 40°C (32 to 104° F)
  • Operating Humidity
30 to 85 % (no condensation)
  • Storage & Transport Temperature
-10 to 40°C (14 to 104° F)
  • Storage & Transport Humidity
0 to 90 % (no condensation)
  • Operating / Storage / Trans. Pressure
700 hPa to 1060 hPa
  • Dimensions (W x H x D)(inches)
505 x 444 x 119 (20 x 17 3/8 x 4 3/4)
  • Mass
Approx. 9.8Kg (with 2 x BKM-255DV) 21 lb 10 oz
  • Regulation Compliance
UL60601-1, CSA 22.2 No.60601.1, EN 60601-1, FCC-A, IC-A, CE (MDD)-B, C-Tick, VCCI-A, JEIDA
  • Supplied Accessories
AC Power Cord (1),AC plug holder (2), Operating Instructions (1), CD-ROM (1),Warranty Card (1), Using the CD-ROM Manual (1), Interface Manual for Programmers (1), Quick Reference (1), When you first use the monitor (1), Sales Companies Guide (1)

 

Back to monitor page

Kappa Medical, Inc.
PO Box 11808
Prescott, AZ  86304
1-800-634-0880 USA
1-928-778-0840 Phone
1-928-776-9250 Fax

kappamedical@gmail.com